Auxiliary Materials

Proper processing is essential for achieving precise prosthetic results. Our auxiliary materials provide the ideal foundation for working with our resins and support you in achieving optimal outcomes.

ISOLAN
Alginate-based insulating solution

For the perfect insulation of hot and cold polymerisates against plaster. The insulating solution can be applied very thinly and therefore enables the finished work to fit exactly. Despite the thin layer thickness, optimum separation of plaster and resin is ensured.

Product details

Indications:

  • Insulation of plaster surfaces against polymers

Application:

Apply 1-2 thin coats of insulating solution to the plaster model with a brush and allow to dry.

Features:

  • Short drying time
  • Can be applied in thin layers, for precise fitting accuracy
  • Smooth surfaces
  • Easy removal of the finished work from the plaster model
  • Stable in storage
  • Formaldehyde-free

Colour:

blue, red, yellow, violet, petrol and colourless

Dosage forms / packaging:

Liquid: 500ml & 1000ml

We supply both finished products and partially customised goods according to your specifications and wishes. Other delivery quantities such as large containers on request.

ACRYLATE SOLVENT
Special bonding agent

Special chemical bonding agent to improve the bond between the denture material and highly cross-linked, prefabricated acrylic teeth.

Product details

Indications:

  • For improving the bond between prefabricated resin teeth and PMMA resins

Application:

Apply a thin layer of the liquid 1-2 times to the cleaned tooth surfaces and insert into the denture after a short exposure time (approx. 2 minutes).

Features:

  • short application time
  • easy processing
  • Robust and long-lasting results

Colour:

colourless

Dosage forms / packaging:

Liquid: 30ml

We supply both finished products and partially customised goods according to your specifications and wishes. Other delivery quantities, such as large containers, are available on request.

DUPLIGEL
Extra-hard precision duplicating compound

Dupliermasse türkis

retec® DUPLIGEL was specially developed for the model casting and flask casting techniques. The hydrocolloid duplicating compound based on agar-agar is characterised by unusually good dimensional accuracy and reproduction precision as well as high elasticity and tear resistance.

Product details

Indications:

  • Duplications in full denture prosthetics
  • Duplications in the orthodontic technique

retec® DUPLIGEL is ideal for gypsum-based and phosphate-bonded investment materials as well as all common cold-curing denture and orthodontic resins.

Processing:

Add the duplicating material in small pieces to the melter and heat to 90 - 95°C while stirring (do not boil). Then allow to cool to the processing temperature of 46 - 48°C and process further.

Features:

  • Very good flowability
  • exact attention to detail
  • extra hard
  • reusable
  • Resistant to fungi and bacteria
  • biologically harmless 

Colours:

retec® DUPLIGEL is available in the colours blue, green and turquoise.
Special colours on request.

Dosage forms / packaging:

Standard quantity: 6 kg bucket

We supply both finished products and partially packaged goods according to your specifications and wishes. Other delivery quantities such as large containers on request.

TRAY
The stable spoon material

retec® TRAY is a kneadable, adhesive-free resin for the fabrication of customised functional and impression trays as well as registration and base plates.

Product details

Indications:

  • Fabrication of customised impression trays
  • Fabrication of customised base plates for
    - wax walls
    - Tooth set-ups with wax

Processing:

Mixing ratio: 20 g powder with 4.5 g liquid
Mixing time: approx. 15 seconds
Swelling phase: approx. 45 seconds
Plastic-modelling phase: approx. 4 minutes

Polymerisation takes place automatically at room temperature after approx. 7-8 minutes.

Features:

  • simple application
  • very short swelling phase
  • tack-free plastic phase
  • high rigidity, dimensionally stable
  • fast finishing
  • no lifting from the model

Colours:

retec® TRAY is available in the colours white-opaque, blue-opaque, yellow-opaque and pink-opaque. Special colours on request.

Dosage forms / packaging:

Powder: 1000 g plastic bottle
Liquid: 500 ml glass bottle

We supply both finished products and partially customised goods according to your specifications and wishes. Other delivery quantities such as large containers on request.

Note: Medical device. Classification according to Regulation (EU) 2017/745 Article 52(7) Class I for dental aids with short-term intraoral use.