Cold Cure Polymers

Our cold-curing polymers enable fast and uncomplicated processing without high energy and time expenditure. In addition, they offer excellent physical properties, absolute colour stability and the highest fitting accuracy due to minimal shrinkage.

PRESS LT
Universal denture acrylic

retec® PRESS LT is the all-rounder among denture acrylics and was specially developed for dental technicians who want to cover all applications with just one acrylic.

Product details

Indications:

  • Completion of model cast dentures
  • Total upper and lower dentures using the casting method
  • Partial and total relining (indirect application)
  • Completions and repairs

Processing:

Mixing ratio: 10 g powder with 7 g liquid
Swelling phase: approx. 30 seconds
Pouring phase: approx. 3 minutes
Plastic modelling phase: approx. 3 minutes

Polymerisation takes place at a pressure of 2-3 bar and a water temperature of 45-50°C [113-122 °F] for approximately 7 minutes.

Features:

  • Universal application
  • Pleasant processing width
  • Very good flowability
  • Easy to finish and polish
  • Homogeneous surface, very low plaque susceptibility
  • Absolute colour stability due to a catalyst system without tertiary amines
  • Tested and certified biocompatibility
  • Phthalate, BPA and cadmium free

Colours:

retec® PRESS LT is available in colourless, light pink, light pink veined, pink, pink veined, pink opaque. Special colours on request.

Dosage forms / packaging:

Powder: 1.000 g, 5.000 g
Liquid: 500 ml, 5.000 ml

We deliver finished products as well as partially packaged goods according to your specifications and wishes. Other delivery quantities such as bulk containers are available on request.

Note: Medical device. Classification according to DIN EN ISO 20795-1, Type 2 Class 1 and according to MPRL 93/42/EEC Annex IX, Class IIa for removable and for fixed dentures.

 

PRESS LT PLUS
The Innovative Microbead Plastic

retec® PRESS LT PLUS is characterised by its special patented polymer composition. The microbead technology allows the plastic to be processed with a significantly reduced monomer content compared to commercially available autopolymers. This results in reduced polymerisation shrinkage and higher fitting accuracy with lower residual monomer content.

Product details

Indications:

  • Completion of model cast dentures
  • Total upper and lower dentures in the casting process
  • Partial and total relinings (indirect application)
  • Completions and repairs

Processing:

Mixing ratio: 10 g powder with 5 g liquid
Swelling phase: approx. 30 seconds
Pouring phase: approx. 3 minutes
Plastic modelling phase: approx. 3 minutes
Polymerisation (2-3 bar, 45-50 °C): approx. 7 minutes

Features:

  • Pleasant processing width
  • Very good flowability
  • Optimum mucous membrane compatibility due to low residual monomer content
  • Homogeneous surface, very low plaque susceptibility
  • Easy finishing and polishing
  • Absolute colour stability due to a catalyst system without tertiary amines
  • Tested and certified biocompatibility
  • Phthalate, BPA and cadmium free

Colours:

retec® PRESS LT PLUS is available in colourless, light pink, light pink veined, pink, pink veined, pink opaque. Special colours on request.

Dosage forms / packaging:

Powder: 100 g, 1.000 g, 5.000 g, 10 kg
Liquid: 80 ml, 500 ml, 5,000 ml

We deliver finished products as well as partially packaged goods according to your specifications and wishes. Other delivery quantities such as large containers are available on request.

Note: Medical device. Classification according to DIN EN ISO 20795-1, Type 2 Class 1 and according to MPRL 93/42/EEC Annex IX, Class IIa for removable and for fixed dentures.

PRESS VARIO
Stress-free processing due to longer processing time

retec® PRESS VARIO enables the user to work pleasantly and stress-free thanks to its extended processing time. The plastic is particularly popular in the summer months or in warmer regions, as it can be processed without restrictions even at higher ambient temperatures.

Product details

Indications:

  • Completion of cast model dentures
  • Fabrication of complete dentures in the casting process
  • Partial or total relining (indirect application)
  • Completions and repairs

Processing:

Mixing ratio: 10 g powder with 7 g liquid
Swelling phase: approx. 30 seconds
Pouring phase: approx. 3 minutes
Plastic modelling phase: approx. 20 minutes

Polymerisation takes place under a pressure of 2-3 bar and a water temperature of 45-50°C for approx. 15-20 min.

Features:

  • Universal application
  • Long processing width
  • Very good flowability
  • Optimal mucous membrane compatibility
  • Absolute colour stability due to a catalyst system without tertiary amines
  • Tested and certified biocompatibility
  • Phthalate, BPA and cadmium free

Colours:

retec® PRESS VARIO is available in colourless, light pink, light pink veined, pink, pink veined, pink opaque. Special colours on request.

Dosage forms / packaging:

Powder: 1.000 g, 5.000 g
Liquid: 500 ml, 5.000 ml

We deliver finished products as well as partially packaged goods according to your specifications and wishes. Other delivery quantities such as bulk containers are available on request.

Note: Medical device. Classification according to DIN EN ISO 20795-1, Type 2 Class 1 and according to MPRL 93/42/EEC Annex IX, Class IIa for removable and for fixed dentures.

PRESS VARIO PLUS
The stress-free microbead plastic

retec® PRESS VARIO PLUS enables the user to work particularly comfortably due to its extended processing time. Due to the reduced monomer content, a high fitting accuracy and minimal shrinkage is achieved.

Product details

Indications:

  • Completion of model cast dentures
  • Total upper and lower dentures in the casting process
  • Partial and total relinings (indirect application)
  • Completions and repairs

Processing:

Mixing ratio: 10 g powder with 5 g liquid
Swelling phase: approx. 30 seconds
Pouring phase: approx. 3 minutes
Plastic modelling phase: approx. 20 minutes
Polymerisation (2-3 bar, 45-50 °C): approx. 35 minutes

Features:

  • Long processing width
  • Very good flowability
  • Optimal mucous membrane compatibility due to low residual monomer content
  • Homogeneous surface, very low plaque susceptibility
  • Easy finishing and polishing
  • Absolute colour stability due to a catalyst system without tertiary amines
  • Tested and certified biocompatibility
  • Phthalate, BPA and cadmium free
     

Colours:

retec® PRESS VARIO PLUS is available in colourless, light pink, light pink veined, pink, pink veined, pink opaque. Special colours on request.

Dosage forms / packaging:

Powder: 100 g, 1.000 g, 5.000 g, 10 kg
Liquid: 80 ml, 500 ml, 5,000 ml

We deliver finished products as well as partially packaged goods according to your specifications and wishes. Other delivery quantities such as large containers are available on request.

Note: Medical device. Classification according to DIN EN ISO 20795-1, Type 2 Class 1 and according to MPRL 93/42/EEC Annex IX, Class IIa for removable and for fixed dentures.

PRESS JET
Der universelle Injektionskunststoff

retec® PRESS JET ist der Allrounder für Prothesen, die im Injektionsverfahren hergestellt werden. Daneben eignet sich das Material ebenfalls hervorragend für die Gießtechnik.

Product details

Indications:

  • Total maxillary and mandibular dentures using the injection procedure
  • Completion of cast model dentures
  • Partial and total relinings (indirect application)
  • Completions and repairs

Processing by injection: 

Mixing ratio: 10 g powder with 5 g liquid
Swelling phase: approx. 30 seconds
Filling of the injection system: after approx. 3 minutes
Injection: after approx. 4 - 5 minutes
Polymerisation (2-3 bar, 45-50 °C): approx. 7 minutes

Processing in the casting process:

Mixing ratio: 10 g powder with 7 g liquid
Swelling phase: approx. 30 seconds
Pouring phase: approx. 2-3 minutes
Plastic-modelling phase: approx. 3 minutes
Polymerisation (2-3 bar, 45-50 °C): approx. 20 minutes

Features:

  • Universal application
  • Very good flowability
  • High fitting accuracy
  • System-independent use
  • Tested and certified biocompatibility
  • Phthalate, BPA and cadmium free
     

Colours:

retec® PRESS JET is available in colourless, light pink, light pink veined, pink, pink veined, pink opaque. Special colours on request.

Dosage forms / packaging:

Powder: 1.000 g, 5.000 g
Liquid: 500 ml, 5.000 ml

We deliver finished products as well as partially packaged goods according to your specifications and wishes. Other delivery quantities such as bulk containers are available on request.

Note: Medical device. Classification according to DIN EN ISO 20795-1, Type 2 Class 1 and according to MPRL 93/42/EEC Annex IX, Class IIa for removable and for fixed dentures.

PRESS JET Plus
Microbead plastic with longer plastic phase

retec® PRESS JET Plus is an innovative microbead resin for the fabrication of dentures by injection or casting. The product convinces with a high fitting accuracy and minimal shrinkage due to the reduced monomer content.

Product details

Indications:

  • Completion of cast model dentures
  • Fabrication of complete dentures using the injection method
  • Partial or total relining (indirect application)
  • Completions and repairs

Processing:

Mixing ratio: 10 g powder with 4 g liquid
Swelling phase: approx. 30 seconds
Plastic modelling phase: approx. 5 minutes
Polymerisation (2-3 bar, 45-50 °C): approx. 15 minutes

Features:

  • Very good flowability
  • Optimal mucosa compatibility due to low residual monomer content
  • More homogeneous surface, very low plaque susceptibility
  • Easy finishing and polishing
  • Absolute colour stability due to a catalyst system without tertiary amines
  • Tested and certified biocompatibility
  • Phthalate, BPA and cadmium free

Colours:

retec® PRESS JET Plus is available in colourless, light pink, light pink veined, pink, pink veined, pink opaque, V5, F34. Special colours on request.

Dosage forms / packaging:

Powder: 100g, 1.000g, 5.000g, 10kg
Liquid: 80ml, 500ml, 5.000ml

We deliver finished products as well as partially packaged goods according to your specifications and wishes. Other delivery quantities, e.g. large containers, are available on request.

Note: Medical device. Classification according to DIN EN ISO 20795-1, type 2 class 1 and according to MPRL 93/42/EWG appendix IX, class IIa for removable and for fixed dentures.

PRESS HYBRID
Our latest development

retec® PRESS HYBRID is a high-end denture material with a new patented polymer composition. Thanks to an elaborate mixture of the latest bead polymers, this product is one of the most modern and interesting materials in denture fabrication. It is characterised above all by its universal applicability, its aesthetics and its high quality 

Product details

Indications:

  • Completion of cast model dentures
  • Total upper and lower dentures
  • Partial and total relinings (indirect application)
  • Additions and repairs
  • Also suitable for use in the injection technique 

Processing:

Mixing ratio: 10 g powder with 5 g liquid
For use in the injection technique: 10 g powder with 4 g liquid
Swelling phase: approx. 30 seconds
Pouring phase: approx. 2-3 minutes
Plastic modelling phase: approx. 6 minutes
Polymerisation (2-3 bar, 55 °C): approx. 30 minutes

Features:

  • Universal denture acrylic
  • Long processing width
  • Highest fitting accuracy
  • Very good flowability
  • Excellent polishing properties
  • Homogeneous surface, very low plaque susceptibility
  • Optimum mucous membrane compatibility due to low residual monomer content
  • Absolute colour stability due to a catalyst system without tertiary amines
  • Tested and certified biocompatibility
  • Phthalate, BPA and cadmium free

Colours:

retec® PRESS HYBRID is available in colourless, light pink, light pink veined, pink, pink veined, pink opaque. Special colours on request.

Dosage forms / packaging:

Powder: 100 g, 1.000 g, 5.000 g, 10 kg
Liquid: 80 ml, 500 ml, 5,000 ml

We deliver finished products as well as partially packaged goods according to your specifications and wishes. Other delivery quantities such as large containers are available on request.

Note: Medical device. Classification according to DIN EN ISO 20795-1, type 2 class 1 and according to MPRL 93/42/EWG appendix IX, class IIa for removable and fixed dentures.